0800 33 1371Get a free quote

Services

Plastering and GIB stopping in Auckland

IDW's plasterers and GIB stoppers finish new plasterboard, repair damaged walls and ceilings, and skim tired ones, across Auckland. The same crew paints afterwards, so new and old surfaces end up reading as one wall.

5.028 Google reviews

Plasterers and GIB stoppers in one crew

GIB stopping is finishing new plasterboard: taping the joints, building them up over three coats and sanding them flat so the wall is ready for paint. Plastering, as we use the word, is the repair and skim work on walls and ceilings that are already there.

Most renovations need both. A new doorway or an extension means new board next to old walls, and the old walls usually need repairs before they are painted. Because one crew does the stopping, the plastering and the painting, the whole room is finished to one standard rather than handed from trade to trade.

  • GIB stopping on new builds, extensions and renovations
  • Level 4 finishes for most rooms, Level 5 skims for critical light, dark or gloss paint
  • Square-stopped and coved ceilings
  • Crack, hole and joint repairs
  • Patching after electrical and plumbing work
  • Water-damage repairs once the leak is fixed
  • Skim coating walls and ceilings

GIB stopping or plastering: which do you need?

If the board is new, you need stopping. Ask for the finish level: Level 4 suits most bedrooms and living areas with flat paint, and Level 5 adds a thin skim over the whole surface where low sun, big windows or rows of downlights would show up every joint.

If the walls are already there but cracked, dented or patchy, you need repairs. Small damage is cut back, filled and blended in. Where a whole wall or ceiling is tired or uneven, a skim coat gives it a new surface without relining the room. A sheet that is badly water damaged is replaced, then stopped like new board.

Not sure? That is what the quote visit is for. We look at every wall and ceiling and tell you what each one actually needs.

How we finish a wall

  • Joints taped and built up over three coats, each one left to dry
  • Sanded flat and checked under a raking light before it is called ready
  • Sealed so the top coats dry evenly
  • Painted by the same crew, with two top coats

What plastering and GIB stopping cost

These are typical Auckland ranges, a guide for budgeting rather than IDW's price list. Every job is priced in writing after we have seen it. Our GIB stopping cost guide explains what moves a price up or down.

Typical plastering and GIB stopping costs in Auckland. A guide for budgeting, not a quote.
JobTypical Auckland range
GIB stopping labour$25 to $70 per m²
Standard bedroom, Level 4, materials included$1,000 to $1,800
Whole three-bedroom house$8,000 to $16,000
Plaster and crack repairs before painting$200 to $1,000 a room
Ceilings above 2.4 mAdd 15% to 25%

Quotes and what to expect

Hadi Haidary, who owns IDW, quotes and oversees every job. The free quote includes a wall health check, valued at $397: we look over the walls and ceilings, tell you what actually needs doing and which finish suits each room, and put the price in writing. The price we quote is the price you pay, and the work is covered by one 5-year workmanship guarantee.

Dian McCallum, Google review: “Extremely top plastering and painting work. Professional communication and high standard of skilled work. Very happy with the price and completed job. Wouldn't hesitate to recommend Hadi and his team to anyone needing excellent plastering and painting work. Very impressed with the 5 year warranty, that reflects the high standard of work!”

We work across Central Auckland, East Auckland, South Auckland, West Auckland and the North Shore. Call 027 521 7411 or 0800 33 1371, Monday to Saturday 8am to 6.30pm and Sunday 8am to 2pm.

Updated November 2026

Our work

Questions people ask

Is GIB stopping the same as plastering?

They overlap, and many people use the words for the same job. GIB stopping is finishing the joints on new plasterboard. Plastering usually means repairs and skim coats on existing walls and ceilings. IDW does both, and paints afterwards.

How much does GIB stopping cost in Auckland?

Typically $25 to $70 per square metre for labour, depending on the finish level, the ceiling height and the state of the board. A standard bedroom at Level 4 is typically $1,000 to $1,800 with materials. We price every job in writing after seeing it.

How long does GIB stopping take?

Each coat has to dry before the next goes on. In humid Auckland winter weather that means 24 to 36 hours between coats, so a three-coat Level 4 finish takes about four to seven days including sanding.

Do you do exterior plastering?

No. We plaster interiors only. We paint plaster-clad homes, but exterior plaster repairs and recladding are a job for a cladding specialist.

Do you work for builders?

Yes. We line and stop new builds, renovations and commercial fit-outs, and work to the builder's programme.

Get a free quote

Tell us about the job and we will call you back to arrange a time to come and see it. Every quote starts with a free wall health check, valued at $397: we look over the job, tell you what actually needs doing, and put the price in writing. The price we quote is the price you pay.

Call 027 521 7411Get a free quote