GIB stopping in Auckland
Joints taped, coated and sanded to the level of finish your paint and lighting need.
5.028 Google reviews
Stopping is the part of the job you only notice when it is done badly. Low sun through a window or a row of downlights will pick out every joint that was rushed.
We tape, coat and sand to the finish level the room calls for, and we check our own work under a raking light before we call it ready for paint. For dark colours, gloss finishes or rooms with critical lighting we recommend a Level 5 skim over the whole surface.
What we do
- Level 4 finish for most homes
- Level 5 skim finish for critical lighting, dark or gloss paint
- Square-stopped and coved ceilings
- Crack, hole and joint repairs
GIB stoppers who also paint
GIB stopping is the taping, coating and sanding that turns new plasterboard into a surface ready for paint. It is the part of the job you only notice when it has been rushed, because the paint shows every joint.
Our GIB stoppers work on new homes, extensions, renovations and commercial fit-outs across Auckland, and the same crew paints the walls afterwards. If a joint shows once the paint is on, there is no other trade to blame. It is ours to fix.
Level 4 or Level 5
A Level 4 finish, with the joints built up over three coats and sanded smooth, suits most bedrooms and living areas painted in a flat finish.
Level 5 adds a thin skim over the whole surface. It is worth it where light hits the wall at a low angle from big windows, skylights or rows of downlights, or where the paint is dark or glossy, because a Level 4 joint can show through. We tell you at the quote which rooms need which.
How we stop a wall
- Joints taped and built up over three coats, each one left to dry
- Square-stopped or coved ceilings, as you prefer
- Sanded flat and checked under a raking light before it is called ready for paint
- Sealed so the top coats dry evenly
What GIB stopping costs in Auckland
Typical Auckland labour is $25 to $70 per square metre, depending on the finish level, the ceiling height and the state of the board. A standard bedroom at Level 4 typically costs $1,000 to $1,800 with materials, and a whole three-bedroom house $8,000 to $16,000. Our GIB stopping cost guide has the full breakdown. We price every job in writing after seeing it.
Quotes and what to expect
Hadi Haidary, who owns IDW, quotes and oversees every job. The free quote includes a wall health check, valued at $397: we look over the job, tell you what actually needs doing, and put the price in writing. The price we quote is the price you pay, and every job is covered by one 5-year workmanship guarantee.
Susan W, Google review: “2nd time using Hadi and his team at Interior Drywall Worx. Exemplary work between a team arriving as agreed, and courteously tidying up and returning on time once dry after the weekend to sand finish. A perfect job and price. Thanks again, would highly recommend IDW Ltd.”
The paint we finish with
When we paint the walls we have lined, stopped or plastered, it is with Resene, Dulux, Aalto, Paint+ or Wattyl, so the finish is as good as the surface under it.
We are Site Safe members, and IDW is 100% New Zealand owned and operated.






Resene, voted New Zealand's most trusted paint brand every year from 2012 to 2023


Recent work
Read more
Plastering and GIB stopping in Auckland
IDW's plasterers and GIB stoppers finish new plasterboard, repair damaged walls and ceilings, and skim tired ones, across Auckland. The same crew paints afterwards, so new and old surfaces end up reading as one wall.
GIB stopping cost in Auckland
The typical GIB stopping cost in Auckland is $25 to $70 per square metre for labour, depending on the level of finish. Here are typical ranges for a room and a whole house, what pushes a price up, and how to compare quotes.
What is GIB stopping?
What is GIB stopping? It is the finishing of plasterboard: joints taped, screws filled, coats built up and sanded until the board reads as one smooth surface, ready for paint. Here is how it is done, so you can judge a quote or a finished job.
GIB repairs in Auckland: holes, cracks and water damage
GIB repairs for Auckland homes, from a door handle through the wall to a ceiling stained by a leak. We look for the cause, repair the board, then stop and paint it so the repair disappears into the wall.
Ceiling GIB stopping, skimming and repairs in Auckland
Ceiling GIB stopping in Auckland homes, from new ceilings in a renovation to skimming an old popcorn ceiling flat and repairing cracks and leak stains. A ceiling shows faults a wall would hide, so it gets more care.
Questions people ask
How much does GIB stopping cost per square metre?
Typically $25 to $70 per square metre for labour in Auckland. Plain walls at a Level 4 finish sit toward the lower end; Level 5 skims, high ceilings and detailed rooms sit toward the top.
How long does GIB stopping take?
Each coat has to dry before the next goes on. In humid Auckland winter weather that means 24 to 36 hours between coats, so a three-coat Level 4 finish takes about four to seven days including sanding.
Do you repair cracks and holes in stopped walls?
Yes. Cracks, holes, popped screws and patches after electrical or plumbing work are cut back, filled and sanded so they disappear once painted.
Do you give free quotes?
Yes. We come and see the job first, and the free quote includes a wall health check valued at $397. The price is in writing, and it is the price you pay.
GIB stopping across Auckland
GIB stoppers and plasterers in Central Auckland, North Shore, East Auckland, South Auckland and West Auckland. All areas
Other services
GIB lining
Plasterboard fixed straight and screwed to depth, so the stopping and paint that follow have a flat surface to sit on.
Plastering
Interior skim coats and plaster repairs that leave old and new surfaces reading as one wall.
Interior painting
Walls, ceilings, doors and trim, prepared properly and painted with a tidy site at the end of each day.
Exterior painting
Weatherboard, plaster and brick homes, roofs, fences and decks, prepared and painted to last.
Get a free quote
Tell us about the job and we will call you back to arrange a time to come and see it. Every quote starts with a free wall health check, valued at $397: we look over the job, tell you what actually needs doing, and put the price in writing. The price we quote is the price you pay.






